Pyar Studios

Working With Tape Saturation

https://www.youtube.com/watch?v=UUpzBX4jN_I
Different Ways To Use Compression

https://www.youtube.com/watch?v=msgIIXtu8xA
Another Mad Alice Release

This was a great day. The band had written the song a few days before and were so happy with it that they brought it straight to the studio. We basically just set them up and hit go. So here's another one from Liverpool's 'Mad Alice' with their bluesy grungy sound. Recorded right here at PYAR Music Studios. https://www.youtube.com/watch?v=2c_CUKtJgVg
Mad Alice Release Single Recorded At PYAR Studios

We had tons of fun recording this one. The band asked for a really live and unedited sound and wanted the song to have a classic production feel. No over processing, just in your face grungy tone and feel. It takes a lot of guts to do that and we really enjoyed working with them. Check out Vulture Tree by Mad Alice below. https://www.youtube.com/watch?v=zze_nCJ7-v0
Improving Your Guitar Tone

Hello again and welcome to another PYAR studios blog. This time we are going to talk about guitar tone. We should immediately preface this with the fact that a lot of the following will be based on opinion as well as fact. When it comes down to it, there are no rules in music. Whatever works is for the song is always the option to take. Now then. The guitar is a very versatile instrument. It can serve many purposes in a mix and can either be the driving force, the screaming lead, or the shiny detail on top. Likewise, it can be all three of those things at the same time. So how do you make sure that your guitar tone isn’t going to make people’s ears bleed? As with anything, it starts at the source. No matter what you are recording and what microphones you are using to capture it, a great tone starts from step one. In this case it’s the player and the guitar. There's no replacement for a great performance and there is a very good reason that a professional guitar player still sounds plausible through a bad amplifier. It's true that a lot of a guitarist's tone is in his/her fingers. We can’t say much else about the player part as that’s totally personal but we can address the guitar part. We said this in our last blog but it's important so here we go again. Always take care of your instrument and make sure that the pickups and wiring are in check, as well as everything else. You can’t express your inner musical genius via a piece of junk, although we did see a guy hitting some bins once and that was pretty impressive. Intonation is also massively important. If your intonation is incorrect then you can easily find yourself spending hours trying to tune your guitar, only to find that it ‘changes tuning’ depending on where you’re playing on the neck. This can be frustrating on or off stage and nobody wants their performance to be horribly out of tune. Next up is cables. That’s right, we said it. We’ve heard countless people tell us that cables don’t make a difference and that the quality of a guitar cable is completely unimportant. WRONG! It is important. Try it. Get a cheap cable and then a high quality cable and listen to the difference. That signal coming out of the guitar can degrade and whilst it is slightly 'tone geek' of us to bring it up, that’s what we’re talking about right? If you want a great tone, then you may as well follow suit and buy great cables; Look at it that way. Every part of your signal chain is important and if you want to have an edge on your guitar playing friends then you need to go into details with this. Cables are something people often overlook. So you’ve got your instrument and cables in check. Your favourite pedals are all set and you’re about to turn your amp on. Stop right there! Is your amp connected to a speaker before you turn it on? We’ve found that most people don’t know that this can damage your amp so unless your amplifier is a pre-connected combo amp, make sure that it has a ‘load’ attached before you power it up. By load, in this case we mean speaker. You *can* get a load box to handle this for various other applications but they don’t make much noise… We know that this isn’t a tone thing but while we are talking about guitars we thought we may as well throw this in and save some amplifier lives. It’s an ongoing debate what creates the best tone and there are many ways to achieve it. You can choose a solid state amp, you can choose a valve amp, you can model your tone with the likes of Kemper and Axe FX products or from a DI in your favourite DAW. There are a lot of ways to approach it, a lot of different types of tone and a lot of personal preferences. We can’t really preach too much there because people will always like what they like. We use a mix. Our favourite are valve amps and in the box guitar sims (from a great DI signal, it has to be!). Solid state amps are typically too hissy at the top for our liking but most amps can sound great if used for purpose. Sometimes a trashy practice amp can make a great grunge distortion. You never know until you try it and you should always keep an open mind. Here’s a story for you. It’s like the Jungle Book except rubbish and nothing like the Jungle Book. Many years ago, I was running a valve amp with a line 6 POD. I was taking the signal from the guitar, into the POD, into the pre-amp section of the amplifier (the input) and doing my best to get it to sound good. The most I could achieve seemed to be an “ok” sound. Naturally being a silly guitar noob, I blamed it on Line 6 as it was cool to hate on them back then. Now it’s only the spider series that really takes heat (and so it should!). Anyway. Whilst it’s perfectly acceptable to run pedals into the pre-amp section of an amplifier, I was making a mistake without realising it. A lot of modern multi-FX units have cabinet simulation technology and various compensations for scenarios in which they are expected to be used directly (without an amplifier involved or straight into a PA). Back then I wasn’t nearly as knowledgeable and I’m definitely not afraid to admit that I have learnt a lot since and still have a lot more to learn, as any audio professional should. A very experienced guitarist friend of mine laughed at me and informed me that I’d missed the cabinet simulation function and ignored what it was doing to my tone going into the pre-amp. He also told me that I’d be much better running the FX straight into the power section of the amplifier, by-passing the pre-amp and turning the pedal’s cabinet simulator off. Let me tell you, it was like God had taken control of my amplifier. The tonal change! The clarity! The punch! It was magnificent. So the lesson here? If you’re making the same mistake I did then, try that. You can thank us by booking in for a session. Deal? Ahem… Know what you're using. Read the manual, study it. Then throw that manual in your manual drawer at home and get on with crafting the best tone in the universe. The more stuff your signal has to go through, the more potential there is for things to go wrong. Bear that in mind too and check every step. Keeping it simple is a surprisingly powerful approach with guitars. Most of the great guitar tones we work with are just a well set-up guitar, with a great player, into a great amp, with a high and low pass filter applied. See? Simple. Just to cover both sides here, cabinet simulation can be a very powerful tool with the right impulse responses but you should chain it after a pre-amp signal where there isn't a real cabinet involved. Generally speaking you'll find a chain along the lines of DI guitar, into pre-amp (real or emulated), into cabinet simulator. This uses an impulse response to recreate the acoustic properties of certain cabinets and speakers and if you choose the right one it can do wonders for your tone. If you have a pedal such as the line 6 Pod HD which takes your signal into its pre-modelling and into an impulse response then when used in the 'direct mode', it actually takes care of those things for you. The only thing you have to do is take the signal into your DAW correctly. A fun thing to try is to turn off the in built cabinet simulator and run your pedal's tone into a cabinet simulator inside your DAW. You can get really crazy with this and come up with some great sounds. Ok what’s next? You're happy with your amp sound and you want to delve into EQ. Guitars tend to need a touch of equalisation and whilst some don’t, there’s nothing wrong with having a play around and learning some ground rules. Any chance to become more familiar with what you're working with is a chance you should take. Let’s talk a bit about the frequency spectrum and what generally happens in each frequency range when we’re talking about guitars. This is definitely just a ballpark guide to the character of most guitars but it shouldn’t be too far off if you directly apply it to your tone. If we’re talking about live guitar here and not a studio situation, then let’s just assume you’re using your favourite EQ pedal. Acoustic Guitar – 120 to 200 Hz - Boom/Body 200 to 400 Hz - Thickness/Wood 2,000 Hz - Definition/Harshness 7,000 Hz - Air/Sparkle 12,000 Hz - Shimmer Electric Guitar - 80 to 90 Hz and below - Mud 120 Hz - Warmth 150 to 200 Hz - Thickness 300 to 1,000 Hz - Life 1,000 to 2,000 Hz – Honk 3,000 to 8,000 Hz - Brilliance and Presence The above is a rather cheat sheet style approach to thinking about guitars but it’s worth making a mental note of these things. By making changes to your guitar in these areas, you can alter the character as you choose by boosting or subtracting frequencies. It is just a rough guide; You will have to do some hunting to identify where these areas are in your tone and to clarify, make it sound as great as you can before you think about applying EQ and then see if you can make it even better. Oh and for you producers tuning into this... Do not EQ your guitars in solo. That’s probably the best way to kill your tone without meaning to. It's far easier to go too far with your EQ moves when you're listening in solo. It can end in disaster. Your guitar needs to sound good in context and nobody is going to hear it on its own very much anyway if it's not acoustic. If you really nail the tone shaping then your guitar sound might be absolutely fine as it is but typically there are some rules that we play by here. You’ll notice that we’ve very bluntly labelled the 80/90hz area of the electric guitar and below as ‘Mud’. The reason we use this term is because mud messes things up. This frequency range should be occupied by the likes of the bass guitar and the kick drum and other bass instruments. Electric guitar *usually* does not need to be there. If you take this part of a guitar signal and solo it on a computer (everything below 90hz) then you will probably find that it just sounds like rumbly nonsense. So let's not mess around. Nuke it! Lower tunings can change where you need to consider filtering (check out a piano and the frequencies of each note for an insight to what we mean here) but generally you should clear that space out. This can be done with a high-pass filter. You also want to hunt for any harsh frequencies and dip them out. These are the ear bleeding frequencies and typically sit in the 2.5khz-5.5khz range. There can be more but that’s a good place to start if you can hear something nasty poking out. You can also try and find a nice presence in your guitar and boost it a little to make sure it cuts through the mix correctly. Always remember though, if you have to be too drastic with the EQ, go back to your source tone and try and fix it there first. The last thing we are going to recommend is the application of low pass filter which will filter off high frequency information past a point of your choice. The best way to find out where to cut is to listen (sorry but it’s the truth!) but again, using electric guitar as an example you can try around 10khz as a cut-off. You’re looking for the point where you lose all the nasty fizz off the top but don’t make your guitar too dull. Get rid of the hiss but don’t lose any useable/pleasant sonic information. That’s the aim of the game with filtering. So there you have it. Some tips for better tone. Don't forget that as a guitarist, you should be aiming to occupy a certain space in the full mix. Once you learn what that is and how to achieve that with your tone, magic will happen when you play together with your band. Experimentation is the winner as long as you bear these things in mind. Thanks for reading. We’ll be back with more soon. There is plenty more where this came from.
The Differences Between A Good Recording And A Bad Recording: Part 1

Hello and welcome to the first ever PYAR Studios blog. We take pride in giving musicians and producers far and wide, honest and helpful advice with no holds barred. We apologise if some of it comes off a little blunt but truthfully, if you can’t take advice from experience then you’re definitely in the wrong industry. Honesty, friendliness and high quality recording is the name of the game at PYAR and we will always pay you the respect of telling you the truth because that's how the best relationships are formed. So where do we start with this one? Such a broad topic and so many things to discuss. Well let’s narrow it down to a perspective that a lot of bands overlook. Ultimately the best thing that any band can do before they enter the studio is be prepared and that’s what we’re going to look at in this article. Let’s talk about bands who are headed into a session. This applies to anyone, whether you’ve done a thousand records before or whether you have just booked your first ever studio session: The difference is in the detail. It’s no secret that the detail of a recording session is a vast sea of possibility that can vary from artist to artist but there are basic fundamentals that every musician can abide by in order to get the best out of their time. We will expand on what we mean by details later. Everyone's music is different and when it comes to being creative, there are no rules. But when it comes to the science of sound and the psychology of a studio situation, there are a few. LEARN YOUR SONGS INSIDE OUT – This one has always baffled us but we see it a lot. Musicians come in, sit down, turn the amps on and then proceed to not know where the hell to start. There’s no point booking a recording session if you don’t know what you’re doing beforehand. It makes life stressful for the engineer/producer, it can be embarrassing for you and ultimately, it’s your time and your money that you will be throwing away. If you’re willing to pay for the time it takes to get everything together from step one then great, no problem. But if you have a limited amount of time that you have paid for in order to get a set of songs done then you really need to know them before you get there. Arrangement, tones, lyrics - They should all be planned before you enter. The producer’s job is to take what you have and make it sound better, not to do it all for you *insert sly comment about pop music*. At PYAR, we always do our best to guide musicians toward their goals and sometimes all that's needed is a swift kick in the fundamentals. Pardon our French but this issue is a bigger one than you’d probably expect. We all want to leave the session with a great recording under our belts and it starts with knowing the songs. You shouldn’t be learning as you go along. That’s what band practice is for. The only real secret to capturing a great sounding performance is actually giving a great sounding performance. 'Fix it in the mix' is not a card that should ever be played and the reason that a lot of your favourite records sound so great is because they sounded mostly that way in the first place. Think of production as icing. But you are the one baking the cake. SORT YOUR GEAR OUT – That guitar you didn’t restring for 1 year, that drum kit that has had the same heads on since you bought it. No! No! No! This is all part of the detail that we mentioned earlier. You aren’t going to get a full and round tone out of your instrument if you haven’t taken care of it and trust us, it matters. Part of our job as engineers/producers is to make sure that the tonal quality of everything that goes into the recording software is stellar. It all stacks up and we can’t stress this enough. If your amplifier is humming and rumbling obnoxiously all the way through the record because you have faulty tubes then guess what? It isn't going to go away. Sure we can mask it but it's still going to be there. It'd be much better to have a nice, clean, friendly tone that isn't going to send our noise floor through the roof. You see; a recording is like a big jigsaw. Everything has to go in a certain place in the frequency spectrum and shine through where it needs to shine through and you have to build that in the same way as you’d build a house. First you lay the foundations and make them solid and neat and then stack on layers to add more and more structure, quality and detail. This mind-set helps a lot with arranging music and production and if your foundations are rubbish then, typically, so is the rest. Many a recording has been ruined by a terrible drum sound, for example, when the rest sounds great. This can be subjective but generally applies. Obviously some music sounds better trashy and raw but the point we're trying to make here is this; Whatever you are trying to achieve, plan for it and tune for it (I’m looking at you, drummers). And if it’s high quality and clean sound that you want then don’t expect the studio to make up for the slack if you’ve recorded with terrible quality instruments and amps. Old bass guitar strings are another major quality killer. Want huge, tight low end with old bass strings? Tough! It won’t happen. Chef’s don’t make high quality food with bad ingredients and it doesn’t matter how well you cook it; a bad steak is always a bad steak. All we can do is put some sauce on and hope it tastes slightly better if that’s what we’re handed. The same goes for the performance when it comes down to it. Brutal but true. WORK WITH YOUR PRODUCER, NOT AGAINST THEM – When you pay for a studio to record your stuff, you are making a divide in responsibility. You handle the performance and your instrument and the producer and/or engineer records it, glues it all together and then mixes it. It’s fine to have a vision of what you want to achieve but there is a reason that picking the right studio and producer is important. You need someone who is going to take your vision and make it happen and maybe add a few sprinkles on top. On our side of things, it’s important for us to be versatile with regards to genres and the approaches that people take with their music. But you can leave that to us. You should have a direction for your music but when it comes to the recording process, keep your ears open and listen to what the studio staff tell you because if you have to come back another day and fix that part you insisted was better your way at first then it's going to cost you money which you wouldn't have had to spend otherwise. And after all, if you can do better yourself then why on earth are you in somebody else's studio? Quite simply for us (and you, let us explain), there’s nothing worse than someone coming into our studio and trying to tell us how to do our jobs (thankfully it doesn't happen very often but we know a lot of producers have this issue with their clients). It’s not good for workflow, it’s not good for relations and believe us when we say that it’s usually not good for your record. If Chris Lord Alge walks in and tells us where we’re going wrong then sure, we’ll listen. But when you make the choice to record with a certain producer you need to trust them to do their job. That might sound like a really egotistical thing to pinpoint but it’s not about that. It’s about the fact that when you’re in a team situation, everyone has their role to play. And there lies the real message. When you enter a studio, you and the engineers/producer are a team. And that's the best way to get things done well. I’m pretty sure most musicians would be annoyed If the engineer was insisting to lay their part down because they ‘can do better’. Perhaps they can… But the musicians should play their role and the producer should play his/hers. It might seem like a forceful way to say it but think about it; If you annoy your producer, it doesn’t matter how professional they are, it’s going to kill the mojo if they realise that you don’t trust them to work with your music. From the moment they understand your performance and how it’s arranged, they will almost certainly have some kind of plan in mind from mic choice and tracking right through to mixing and mastering. Constant questions and doubt aren’t going to help and if anything it’s more likely to invoke bad decisions from everybody. Focus on your performance. If you don’t like the finished product, then that’s when you should say something. I can tell you that at our studio, we are always happy to accomodate people's musical wishes and mix tweaks as long as they are professionally viable. And to producers who face this situation all too often; it’s not always that a band has an ego problem or an attitude problem, in fact, sometimes it’s just that you haven’t given them a clear enough idea of how things work in your world and they have seen a window to try and lead the way because you didn't establish certain things at the start of the session. Make sure you’re confident and in control of the situation and you are much more likely to have a better time all around. The artist is relying on you. Be the person that they can rely on to fill in all of the blanks. This whole thing goes both ways and if you don’t find a nice balance of workflow, compromise and respect then, let’s just say you need to work on that pretty swiftly. The atmosphere and vibe of your studio session is just as important as the rest. Happy customers with a great recording in their hand is your endgame. So be friendly, be chilled, be nice but make sure that things get done properly and effectively for the sake of your clients and down the line, your own reputation. There you have it, a few things from both sides of the scenario. Let us know your thoughts. To be continued… That’s all for now. Want more content like this? Follow us on YouTube over at – https://www.youtube.com/channel/UCgUpbNLlax9LBznkDNt5Cwg You can also get in touch on facebook over at - www.facebook.com/pyarmusicstudios
Furian Record New Single “Circles” With Us

We are extremely happy with how this one turned out. Rock/metal bands. Need we say more? https://www.youtube.com/watch?v=NzTQq8ZHe4U
Welcome

Greetings and welcome to the brand new home of PYAR Studios, Wirral. We absolutely cannot wait to work with musicians both locally and from further afield and hope that you enjoy looking around our website. There's example work for you to listen to on the about page and more is available on request. Any questions? Just ask. You can find the best ways to get in touch in the contact section of the site. All site navigation can be done via the fancy menu on the left side of the page. #WEAREPYAR